SAFETY AND PROTECTION IN THE MANAGEMENT OF THE RAILWAY TRACTION
RAYLWAYS| SUBWAYS| TRAMWAYS | TROLLEY-BUS
Trenitalia earthing device for catenaries – stick with gripper for the carrier rope – stick with gripper for the contact wires
COMPOSITION:
No. 1 aluminum alloy contact clamp with screw tightening bound to the maneuvering stick. Tightening capacity on conductors ø 5-65 mm. |
No. 1 tubular stick in epoxy resin with fiberglass. Configuration in three elements with equal length, joinable through graft by mean of aluminum strengthened joints with stop ring. Equipped with end cap and rubber hand guard. Total length of the stick 5,12 m. |
No. 2 extra flexible copper cables, section 95 mm2, length = 5.5 m with tinned terminals in electrolytic rubber, with one hole at diameter ø12 mm. and the other one at diameter ø 16 mm. |
No. 2 devices for the screw tightening of the wires to the relevant grippers. Screw M12 and tightening rod ø 7 mm, anti-loss in zinc-plated steel. |
No. 1 nylon bag with shoulder belt for the housing and the transfer of the stick |

Download technical sheet
In accordance to STD IEC 61230, IEC 61230 and IEC 61138
Ref./Conf. Spec. Cod. ID N° 37016 esp. 1 Dir. Ing. TRENITALIA
Our Mod. CTO CTO CATEN. TRENITALIA
Cable sec. mm2 | Icc 0,5s |
---|---|
95 | 35 kA |