Ottotecnica - build your safety with us

In place like urban street, extra urban street, parking, gallery, ports, airport, railway, allow the optimisation of the lighting engineering and to obtain notable electric energy saving, of human and material resources in the management of the fitting of illumination. Electromecanic equipment that allow to stabilize and to check the feeding of the lighting systems, allowing to reduce the busy power to optimize the level of lighting.

This create:

• Energy saving up to 40%
• Notable extension of the lamps life
• Sensitive diminution of the useful life of the lamps
• Optimization of the levels of lighting

The STEP doesn't act on the present reactive greatness in the plant and it is not influenced of
it, therefore the operation is regular in every condition, in way almost independent from the
type and nature of the load.

• The circuit of power doesn't employ semiconductor devices, so that to get the maximum forehead reliability of over voltage (of atmospheric lines), commutations of power. The regulator doesn't produce electromagnetic troubles and you/he/she is not influenced of it.

• The regulation of power happens in linear regime, therefore without provoking distorsions on the forms of wave of tension and current.

• The mobile taking that effects the variation of tension is a contact type volvent with small electrographic wheels: the absence of rubbing allows to get an almost void usury. Tests in such sense have shown the superiority of this system in comparison to others and it are possible to estreme an useful life of the regulator of over 10 years.

• The long experience beside the most qualified technicians and under the most different and serious conditions of job, has conducted us to devote big attention to the sturdiness of the regulator in its whole as well as to the reliability and simplicity of management of the logic of control for better meeting the operational necessities of the fittings and the technical preparation of whom will have to manage them

STANDARD REFERENCE:

 CEI EN 60439-1 (CEI 17-13/1) “Equipments of protection and manoeuvre for low tension
(LV – panels)” CEI 64-8/1 “Electric system users at nominal voltage not superior to 1000 V in A.C. and to 1500 in D.C.”
CEI EN 61000-2-2: “Electromagnetic compatibility (EMC). Part 2-2:Environment - Levels
of compatibility for the troubles conducted in low frequency”

CEI EN 61000-3-2: “Electromagnetic compatibility (EMC) Part 3-2: limits - limit for the
emission of harmonic current”

CEI  EN 61000-6-2: “Electromagnetic compatibility (EMC) Part 6-2: Generic norms -
immunity for the industrial environments”